TV Bracket Wall Mount Swivel 42 47 48 49 50 55 60 65 70 Inch Full Motion LCD LED

Features:
- Folds back to within 90mm of the wall
- Extends up to 445mm from the wall
- Pivot/Swivel: up to 45 degrees each way (left / right)
- Forwards Tilt: up to 12 degrees
- Suits Australian studs 600mm / 450mm
- Also suitable for brick / concrete walls
- Max weight capacity up to 45kg
- Suits screens approx 42-70"

For Australian Homes
If mounting on plasterboard walls it is essential that this bracket (like all brackets) is fixed to timber studs.&This bracket is designed to be compatible with Australian standard 600mm stud spacings and 450mm stud spacings. Note that many other brackets on the market are unable to span the more common 600mm studs. This bracket can also be mounted on brick or concrete walls.

Screws / Bolts
This bracket includes a variety of screws/bolts which are suitable for&most&installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit&every&installation.

Low Profile "Slimline" Design
Most of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can't fold up very compactly, making it difficult to position your TV close to the wall. This bracket doesn't have that problem: it can fold back to within 90mm of the wall. Please note however that many manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall (refer to your TV's user manual), due to heat and ventilation concerns.

Horizontal Swivel/Pivot (Left/Right)
This bracket allows you to swivel/pivot your TV up to approximately 45 degrees to the left and right. Please note that larger TVs may be limited to an angle smaller than 45 degrees.

Vertical Tilt (Downward)
This bracket allows you to position your TV flat against the wall, or tilt it forwards to a maximum of approximately 12 degrees.
A tool is required to tighten and lock the arms in place, so set it and forget it!

Will it fit my screen?

This bracket will fit your TV screen (and not be visible from front on) if your TV is:
- At least 890mm wide.
- At least 425mm tall.

The four threaded mounting holes on the back of your TV need to be:
- No more than 890mm apart side to side.
- No more than 400mm apart top to bottom.

Maximum TV weight capacity is 45kg.

Specifications:
- Horizontal Pivot/Swivel: -45 to +45 degrees
- Vertical Tilt: Forward up to 12 degrees
- Distance from wall: 90mm to 445mm
- Maximum weight capacity: 45kg
- Weight of bracket: 8.5kg
- Total width of bracket: 884mm
- Total height of bracket: 420mm
- Maximum mounting hole spacing (horizontal): 800mm
- Maximum mounting hole spacing (vertical): 400mm
- Suits VESA standards up to 800x400mm
- Compatible stud spacings: 450mm / 600mm
- Also suits brick / concrete walls